.png)
35/70 Holbeche Rd, Arndell Park, 2148 NSW
.png)
1300 595 915
Hydro-Mix Ducting Systems
No items found.
The Hydro-Mix Ducting Systems are manufactured specifically for use in the agricultural sector. Simple to install, the system allows for improved performance of the Hydro-Mix Moisture Probe in moisture monitoring for granular materials such as rice and grain moisture monitoring.
The Hydronix Ducting Systems are stainless steel units that have been designed to be inserted into ducting to ensure that a stable flow of granular material such as grain, rice and pulses is maintained over a Hydronix Hydro-Mix microwave moisture sensor.
The Ducting Systems divert a portion of the main flow of material across the measuring face of the sensor and are designed to be full and overflowing when the sensor is measuring. Each Ducting System comes with 3 different sized outlet baffl es which can be inserted to achieve a stable flow.
The ducting is available in two versions, enabling installation into vertical ducting or angled ducting that is 30° – 50° to the vertical. Installation into new or existing ducting systems is simple just requiring a hole to be cut into the ducting where the Hydronix system is to be mounted.
Both systems have material sampling points for sensor calibration purposes.
For best results a minimum flow rate of approximately 1kg per second is recommended depending on material type.
The Hydronix Ducting Systems are stainless steel units that have been designed to be inserted into ducting to ensure that a stable flow of granular material such as grain, rice and pulses is maintained over a Hydronix Hydro-Mix microwave moisture sensor.
The Ducting Systems divert a portion of the main flow of material across the measuring face of the sensor and are designed to be full and overflowing when the sensor is measuring. Each Ducting System comes with 3 different sized outlet baffl es which can be inserted to achieve a stable flow.
The ducting is available in two versions, enabling installation into vertical ducting or angled ducting that is 30° – 50° to the vertical. Installation into new or existing ducting systems is simple just requiring a hole to be cut into the ducting where the Hydronix system is to be mounted.
Both systems have material sampling points for sensor calibration purposes.
For best results a minimum flow rate of approximately 1kg per second is recommended depending on material type.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
